POF CABLE
SK80 Mitsubishi ESKA 2 mm PMMA End-Glow Fiber Optic Cable for Decorative Lighting
SK80 2 mm end-glow PMMA plastic optical fiber for star ceilings, luminous furniture and decorative lighting. Flexible, waterproof, cool-running POF supplied in continuous spool lengths.
Specifications
- Working Temperature(°C)
- -50°C to +70°C
- IP Rating
- IP68
- Fiber diameter
- 0.25mm , 0.3mm , 0.75mm , 1.0mm , 1.5mm ~3.0mm
- Application
- Lighting Decoration
- Effect
- End glow , side glow and sparkle
- Bend Radius (mm)
- ≥10*Fiber Diameter
- Max Receive Angle
- 60
- Length/Weight (OD:2.00mm)
- 350m/1.68kg
- Attenuation (dB/km)
- ≤350(650nm)
- Clad Material
- Fluorine Polymer
- Core Material Refractive Index
- 1.49
- Fiber Type
- PMMA end glow fiber optic cable
- Certification
- EMC, Reach, FCC, ISO9001
SK80 Mitsubishi ESKA 2 mm PMMA End-Glow Fiber Optic Cable for Decorative Lighting
The SK80 is a Mitsubishi 2 mm PMMA end-glow plastic optical fiber (POF) that carries light along a transparent polymer core, used as the light-distribution strand in star ceiling / starry sky.
Manufactured for production use rather than as a one-off sample, the SK80 is built to a stable fiber specification so orders can be repeated with consistent dimensions and performance.
Key Characteristics
- Minimum bend radius: ≥10*Fiber Diameter
- Refractive index figures: 1.49
- Operating temperature range: -50°C to +70°C
- IP68 ingress protection for damp or wash-down environments
- Standard length: 350m/1.68kg
- Certified to EMC, Reach, FCC, ISO9001
- Available in continuous spool lengths for large ceilings, curtains and textiles
- Safe around water and in public spaces — no electrical current at the light-emitting point
Typical Applications
The SK80 is commonly used for star ceilings and starry-sky panels in hotels, KTV rooms, home theaters and bedrooms. The result is a reliable, repeatable build that tolerates the routing, vibration and repeated handling typical of production installations.
Frequently Asked Questions
Q: Does it emit UV or heat? A: Virtually no UV or IR reaches the end points, which helps protect sensitive fabrics and artwork and makes the fiber comfortable to touch.
Q: How is it cut and installed? A: The POF is cut with a sharp fiber cutter and bundled into the illuminator chuck; no fusion splicing or electrical work is needed at the lit end.
Q: Is the fiber safe near water or in a ceiling? A: Yes. The fiber itself carries no electricity and stays cool at the emitting end, so it is suitable for wet areas and occupied spaces when paired with a remotely located light source.
Q: What core diameter should I choose? A: Smaller diameters (0.25–0.75 mm) give fine, dense star points, while 1.0–3.0 mm strands produce brighter points over longer runs. Match the diameter to your illuminator and desired star density.
See the BH Cables assembly range for rugged installations at www.bhcables.com.
