FIBER CONNECTORS
Fiber Optic Cutter / Stripper / Crimping Tool Type 2
This is a fiber-optic termination tool (cutter, stripper or crimping pliers) for clean, repeatable preparation and connectorization of POF/HCS fiber.
Specifications
- Type
- Testers &Tools
- Application
- FTTH FTTB FTTX Network
- Certification
- CE,ISO9001, RoHS,
- IP rating
- IP68
- Operating Temperature
- -55~80Degree
- Color
- Red
- Use
- FTTH
Fiber Optic Cutter / Stripper / Crimping Tool Type 2
This identifies a JINSHANG TECH fiber-optic preparation tool used to strip jackets, cut the fiber to length or seat connector crimps.
JINSHANG TECH supplies the unit as a production item; fiber diameter, jacketing, connectorization and length can be confirmed against the specification before ordering.
Key Characteristics
- Housing/jacket color: Red
- Operating temperature range: -55~80Degree
- IP68 ingress protection for damp or wash-down environments
- Certified to CE,ISO9001, RoHS,
- Strips outer jacket without scratching the polymer core or cladding
- Ratcheting crimp action (crimping pliers) seats connector bodies consistently
- Hardened cutting/stripping jaw sized for plastic and hard-clad fiber
- Square, repeatable cleaves for low-loss end faces without a powered cleaver
Typical Applications
The unit is commonly used for field termination of POF/HCS connectors and patch cords, on-site installation and repair of industrial and audio fiber links, and production assembly of plastic-fiber cable harnesses. The result is a reliable, repeatable build that tolerates the routing, vibration and repeated handling typical of production installations.
Frequently Asked Questions
Q: How is cut quality checked? A: A good cleave is flat and perpendicular; the end is then polished with lapping film before mating.
Q: What are crimping pliers for? A: They compress the connector crimp sleeve or ferrule so the connector grips the fiber and jacket with repeatable retention.
Q: Do I need a separate stripper? A: A fiber stripper removes the jacket while protecting the core, whereas a cutter trims the fiber to length — many field kits carry both.
Q: What tool cuts plastic optical fiber? A: A dedicated POF cutter/cleaver gives a clean square end; general wire cutters crush the polymer core and should not be used.
For the matching Versatile Link and HFBR assemblies, visit the FEV Electronics fiber catalog at www.fevelectronics.com.
